Are grease and oil stains, unfortunately, frequent occurrences on your garage floor and concrete walkway?
You’ve come to the right site if you’ve been puzzled about how to get grease out of concrete because oil spills, leakage, and other industrial disasters can leave stains on concrete.
When it comes to removing oil stains and grease from concrete, there are a few considerations to make.
The first step is to soak up extra grease with an absorbent. After that, use a degreaser to scrub the area thoroughly.
To remove oil stains from concrete, thoroughly clean the entire area.
While these unattractive stains are difficult to remove, it is not impossible.
You can remove oil stains, oil spatters, and even rusty smudges from any concrete floor with the appropriate cleaning solutions and skills.
Here are some of our go-to grease-removal techniques.
Table of Contents
What Are The Advantages Of Getting Rid Of Grease As Soon As Possible?
The first step you should take if you drop oil on your pavement is trying to clean it up as quickly as possible.
There are several reasons for this. Such as the fact that nobody ever likes cooking oil on their terrace and that it is unsightly.
Whatever your motivation, you’ll need to get rid of the oil as early as possible, so you don’t leave anything behind.
The most significant worry is that concrete is a porous rock. This means the oil will soak into the concrete, especially if it isn’t well sealed.
Even if the grease stain is cleaned, if it is left on for too long, it will leave a big stain that is impossible to remove.
The simplest solution to avoid this is to use a high-quality coating on the concrete driveway and reapply it regularly.
Of course, cleaning up baking grease as soon as possible is the most efficient process to avoid it turning yellow.
Why Is It Vital To Remove Any Stains That Have Appeared?
There’s a good possibility that if you spilt grill grease on cement and didn’t clean it up properly, it may leave a stain.
Fortunately, there are several options for decreasing the stain’s appearance.
Depending on the type of stain and its nature, there’s a good chance you’ll be able to remove it altogether.
In no time, you’ll have your lovely concrete terrace or walkway back to normal, and then you’ll be able to keep grilling with ease.
Bear in mind that many treatments for removing long-standing stains on concrete include the use of toxins that can be harmful to your skin if they come in contact.
Whenever working in these situations, you must always take the appropriate precautions to guarantee that the cleaning method only removes the stains.
How To Get Grease Out Of Concrete? [7 Different Methods Available]
Nobody wants an unsightly oil stain on their driveway or garage.
With some essential items you presumably already have on hand, you can remove oil stains from your driveway or other surfaces.
Starting with the simplest and least time-consuming choice is always a smart idea.
If it doesn’t work, try one of the subsequent methods until you find one that works for you.
Here are several methods for removing grease marks from concrete.
- Use baking soda to remove grease stains.
- Using Trisodium Phosphate to clean old oil and grease stains (TSP)
- Using soda pop to remove grease stains from concrete.
- Use vinegar to remove grease.
- Using acetone to clean cooking grease from cement.
- Removing grease oil using microorganisms.
- Removing oil stains from concrete using Muriatic Acid.
Fix One: Use Of Baking Soda to Clean Oil Stains
Baking soda has several implementations. It’s no news that it may be required to clean oil stains from cement.
It works as an absorbent as well as a cleaner. When you need to know what to do to get the rust off the concrete, this method will come in handy.
- Baking soda
- Dish soap
- Nylon brush
Step 1: Apply a heavy layer of baking soda to the grease stain. Leave the mixture to rest for half an hour.
Step 2: Soak a nylon scrub brush in water and squirt it with dish soap.
Step 3: Using the soapy brush, scrub the baking soda onto the concrete until all the grease has gone.
Step 4: Allow the area to air dry after rinsing it with water. Allow the poultice to sit overnight over the entire stain. Sweep the dried residues away with an old broom.
If required, repeat the process.
Fix Two: Cleaning Old Gasoline and Oil Stains Using Trisodium Phosphate (TSP)
This method utilizes trisodium phosphate (TSP) to absorb and remove oil stains from cement.
It’s an inorganic material that produces an alkaline solution when mixed with water.
TSP is a great stain cleanser, degreaser, and grease remover for concrete. You would like to schedule the following operation because it takes overnight.
- 1 cup phosphate of trisodium
- 1 quart of water
- Gloves made of rubber
- Eye protection is essential
- A big bucket
Grease Stain Removal Procedures
Step 1: Mop up any puddles: Cornmeal or sawdust could be utilized (this is particularly necessary instantly after a spill).
Allow three hours for it to sit on the place before cleaning it away.
Step 2: On wet concrete, splash dry detergent for dishwashing. Let it rest for a few minutes prior to pouring hot water over it. Rinse and scrub.
Step 3: Using a stiff brush and powerful laundry detergent, scrub the stain. Wash well with a stream. Allow it to dry before repeating if necessary.
Step 4: Add the trisodium phosphate (TSP) and set it aside for about half an hour.
Step 5: Scrub with a firm brush and hot water after that. Rinse well with fresh water.
If you’re using trisodium phosphate, make sure the location is well ventilated and that you’re wearing rubber gloves to avoid skin contact.
Rinse it thoroughly after each usage.
When there is absolutely no probability of rain, this strategy works well.
Fix Three: Removing Grease Stains Using Soda Pop
This method demonstrates how to remove oil from concrete with soda pop. This isn’t a joke.
While it may appear strange, this method works wonderfully and may even remove grease from a concrete driveway.
You can expect to put some grease on your elbow during this procedure.
- Small bag of cat litter
- Three cans of cola
- Stiff brush
- 1 cup powdered laundry detergent
- 1 cup chlorine bleach
- 1 gallon of hot water
- Rubber gloves
- Eye Goggles
- Garden hose
Step 1: Apply a little coat of cat litter to the afflicted regions. Stroll over the floor in a pair of antique shoes to ground the jumble into the stain.
Once you’ve accomplished this, sweep the muck into a bag and place it in your garbage can.
Step 2: Pour a generous amount of regular cola over the stains and use a stiff nylon brush to paint it into the floor.
Give approximately 20 minutes of sitting time, adding extra cola as needed to prevent the floor from drying.
Step 3: Rinse the soda away with a hose. There must be greyish spots where the grease stains had been.
Step 4: Mix a gallon of warm water with chlorine bleach plus one cup of powder ammonia-free washing detergent.
Step 5: Paint the aggregate into the concrete with a vigorous brush while wearing protective gloves until the discoloration is gone.
Use sparkling water to clean the floor.
Fix Four: Removing Grease Using Vinegar
You’ve detected grease on concrete and want to get rid of it quickly. The following method is straightforward.
This vinegar-based homemade concrete cleaner is a fantastic replacement for conventional cleaning products.
- Half a cup of washing soda
- 2 tbsp white wine vinegar
- A quarter teaspoon of liquid dishwasher soap
- 2 quarts water
- Scrub brush for bucket
Step 1: In a large bucket, mix half a cup of washing soda (never baking soda), two teaspoons of white vinegar, a little dab of liquid dishwasher detergents, and 2 cups of water together.
Step 2: Scrub the solution with a stiff nylon brush after scooping or dumping it onto the stained areas.
Step 3: Wash and repeat until the spots have vanished completely.
Fix Five: How to Remove Cooking Grease from Concrete Using Acetone
This method is similar to the baking powder method, except it permits you to leave the kitchen for the majority of the time.
This DIY solution demonstrates how to use baking soda to remove cooking grease from concrete.
Grease from concrete can be easily removed with the addition of another crucial element.
If you have grease on your carpet, baking soda works effectively as a carpet stain remover.
- Baking soda
Step 1: Begin with around 2 cups of acetone, then gradually add baking soda until the solution resembles a paste.
To completely cover the afflicted areas, you may need more or less acetone, depending on the extent of the stains.
Step 2: Cover the spots with the solution tightly with plastic. Let the mixture rest for a day after taping the borders.
Step 3: Remove the plastic wrap and let the solution dry before sweeping it away.
Fix Six: Removing Grease Oil Using Microorganisms
The most recent breakthrough in the elimination of oil stains from concrete is the use of single-celled microorganisms that feed on crude oil and eats them up like candy.
Enzymes and oxygen break down the oil, releasing carbon dioxide and microorganisms.
When the microorganisms’ food supply (oil) is depleted, they die, making the concrete spotless and oil-free.
It’s the same technology used to clean up oil spills on beaches and in waterways.
- Microbiological cleaner
- Rubber Gloves
Step 1: Pour and evenly distribute the cleaner as much as possible throughout the oil stain.
Step 2: Let it rest for the whole night, and the bacteria will take action. This will allow the bacteria to grow as they feed on oil until no more oil remains.
Step 3: Wash and repeat until the spots have vanished completely.
until no more oil remains.
Fix Seven: Removing Oil Stains From Concrete Using Muriatic Acid
Muriatic acid is a widely available chemical that can be obtained at most hardware stores.
It is commonly used in swimming pool maintenance to control the pH balance, but it also can be used to remove a variety of stains.
Muriatic acid is dangerous for humans despite its wide variety of cleansing abilities and must be used in diluted form to avoid damage to your landscape and substrates.
We’ll show you why and how to clean up with muriatic acid, step by step.
- Muriatic acid
- Rubber gloves
- Eye Safety goggles
- Garden hose
Step 1: Make sure you and your landscaping are safe. Pre-soak any landscape and plants with water using a garden hose to moisten the cells.
Soaking the soil in the area will weaken the cleaning solution when it comes into contact with it.
Step 2: Combine your muriatic acid and water. We recommend starting with a 50:1 dilution and gradually increasing to a 20:1 dilution as needed.
Three ounces of muriatic acid per gallon of water for heavy cleaning. And 6-7 ounces of muriatic acid with one gallon of water for light cleaning.
Step 3: Begin the cleaning process. Begin by using a pump sprayer to apply muriatic acid to the entire concrete pad evenly.
If the treatment works, you will observe a visual change on the concrete, such as oil spots changing black to brown after cleaning.
Step 4: Use a yard hose to pressure wash or rinse. To achieve a clean, symmetrical appearance, pressure washes the surface of the concrete pad in even lines.
Wash the debris away after pressure washing most of the sand and dirt off of one concrete pad to prevent it from sinking back into the cement.
Why not try a DIY stain removal procedure instead of running out and purchasing a pressure washer detergent?
After all, you most likely have a bunch of the components in hand.
All you need is a decent scrub brush, an absorbent like cat litter or sawdust, and a few natural cleaning ingredients like baking soda, vinegar, and soap.
You don’t have to give that grease spot the evil eye every time you walk past it on your way to the car.
Once you’ve figured out how to get grease out of concrete, removing grease wouldn’t have to be a chore.
Travis is a painter by profession. His valuable painting tips help customers know how to do painting hassle-free. He is an expert in handling painting tools and loves sharing his experiences with customers. Travis has been in the painting business for the past 20 years. He is now on the verge of early retirement, passing on the secrets.